@Alphast – good point, but I think that if it was a video card it more likely switch in and out and give me intermittent issues, or cut off completely. With this I’m able to boot into graphical environments off the CD every time.

@Starhawk – thanks. I actually really appreciate all these tips. Experience is telling me that nothing short of reformating the drive won’t help but I want to try everything else before I actually wipe all the data on that drive. I do have a backup, but it would be nice to get it up and running with the old setup. This was actually quite recent windows installation, and it haven’t had a chance to trash itself yet. :P

That occurred to me too Alphast but Luke said he was able to boot into Knoppix so evidently the video card is fine. Video driver maybe but in my experience windows boots to a default driver in cases like that and ya end up in what looks like “VGA mode”, hmmm interesting suggestion tho, Maybe if your video card was very nonstandard and didn’t support VGA mode. But I have never heard of a Video card like that in a modern PC.

Anyway Luke I hope ya fix it and it is not some kind of hard ware problem. Ya probably know as much or more than most of your readers here, certainly than me.

Good luck.

I know this sounds stupid, but could it be something wrong with your video card or video driver? I had something very similar happening once with a half dead video card. It was kind of working on and off (so I could get my data out just like you did), but it would give me this black screen too…

@Gothmog – thanks for the tip. That looks like a great set of tools.

@Starhawk – BIOS seems perfectly fine. I see no signs of corruption or anything. Fixmbr didn’t work, and neither did Windows repair and parallel installation. It seems that nothing short of formating the drive will help. :(

@Miloš – I tried that. No dice. I also tried to install windows on the same partition without wiping the dice first. I was still getting the dash. It seems hopeless.

I’ll assume that you are (were) running XP SP2. If so, get your XP disk and boot from it and select R for repair current Windows installation…this should overwrite any missing or corrupt system files and allow you to boot into Windows again. It might mess up some of your drivers (mainly video), but you should be good to go.

However, try this after you have checked the integrity of your backup. Just in case :)

Have you checked the system CMOS and BIOS settings for configuration errors or corrupt data? My cmos got trashed once and created the same problem. Look thru it if ya haven’t and see if it all looks ok. Also once i had a HD failure and of course it wouldn’t boot tho it could boot into dos and access the HD (for a while at least till the hd concpletely died) But it seems like your HD is probably ok.

So my quess is MBR is trashed or perhaps your partition table. Also had that happen before. I’ve also heard that this problem can be caused by the NTLDR file being trashed or missing, tho I’ve never had that problem.

Hard to beleive an update would trash your system like that tho once a windows 98 update trashed my system completely. I had to e-mail microsuxs cause I couldn’t easily fix it and didn’t wanna reinstall. To there credit they were very prompt in answering and after a few e-mails i had it fixed :)

Anyway i had to say it but ya might have to try to fix your MBR if that is it or reinstall. Sorry for your bad luck.

I suggest grabbing a copy of Hirens Boot CD, which has some neato partition tools. I think 9.3 is the latest version.

This was the first thing I tried. I was really hoping it was just my new USB mouse being stupid. But no. I had the machine booting up with just the keyboard, monitor and ethernet cable plugged in and still no dice.

Try removing all USB devices from your machine and try to boot up again. I see issues where sometimes USB devices stop the computer from booting up properly. Usually ones that have memory card readers, aka printers or memory card readers. Easy and quick and worth a shot right? :)

Interesting. I will give it a shot. I’m not sure if it’s going to work – theoretically this thing is doing the same thing as the standard boot manager, which should be fixable using the FIXBOOT command which of course didn’t work for me.